Bitnami JasperReports Installer

NOTE: Before running the commands shown on this page, you should load the Bitnami stack environment by executing the installdir/use_APPNAME script (Linux and Mac OS X) or by clicking the shortcut in the Start Menu under "Start -> Bitnami APPNAME Stack -> Application console" (Windows). Learn more.

NOTE: When running the commands shown on this page, replace the installdir placeholder with the full installation directory for your Bitnami stack.

Description

JasperReports Server is a stand-alone and embeddable reporting server. It is a central information hub, with reporting and analytics that can be embedded into web and mobile applications.

First steps with the Bitnami JasperReports Stack

Welcome to your new Bitnami application! Here are a few questions (and answers!) you might need when first starting with your application.

What are the system requirements?

Before you download and install your application, check that your system meets these requirements.

How do I install the Bitnami JasperReports Stack?

Windows, OS X and Linux installer

Download the executable file for the Bitnami JasperReports Stack from the Bitnami website.
Run the downloaded file:
- On Linux, give the installer executable permissions and run the installation file in the console.
- On other platforms, double-click the installer and follow the instructions shown.

Check the FAQ instructions on how to download and install a Bitnami Stack for more details.

The application will be installed to the following default directories:

Operating System	Directory
Windows	C:\Bitnami\APPNAME-VERSION
Mac OS X	/Applications/APPNAME-VERSION
Linux	/opt/APPNAME-VERSION (running as root user)

OS X VM

Download the OS X VM file for the Bitnami JasperReports Stack from the Bitnami website.
Begin the installation process by double-clicking the image file and dragging the WordPress OS X VM icon to the Applications folder.
Launch the VM by double-clicking the icon in the Applications folder.

What credentials do I need?

You need application credentials, consisting of a username and password. These credentials allow you to log in to your new Bitnami application.

What is the administrator username set for me to log in to the application for the first time?

For Windows, Linux and OS X installers, the username was configured by you when you first installed the application.
For OS X VMs, the username can be obtained by clicking the Bitnami badge at the bottom right corner of the application welcome page.

What is the administrator password?

For Windows, Linux and OS X installers, the password was configured by you when you first installed the application.
For OS X VMs, the password can be obtained by clicking the Bitnami badge at the bottom right corner of the application welcome page.

How to start or stop the services?

Linux

Bitnami native installers include a graphical tool to manage services. This tool is named manager-linux-x64.run on Linux and is located in the installation directory. To use this tool, double-click the file and then use the graphical interface to start, stop or restart services. Server log messages can be checked in the "Server Events" tab.

The native installer also includes a command-line script to start, stop and restart applications, named ctlscript.sh. This script can be found in the installation directory and accepts the options start, stop, restart, and status. To use it, log in to the server console and execute it following the examples below:

Call it without any service names to start all services:
```
  $ sudo installdir/ctlscript.sh start
```

Use it to restart a specific service only by passing the service name as argument - for example, mysql, postgresql or apache:

  $ sudo installdir/ctlscript.sh restart mysql
  $ sudo installdir/ctlscript.sh restart postgresql
  $ sudo installdir/ctlscript.sh restart apache

Obtain current status of all services:
```
  $ installdir/ctlscript.sh status
```

The list of available services varies depending on the required components for each application.

Mac OS X

Bitnami native installers include a graphical tool to manage services. This tool is named manager-osx on Mac OS X and is located in the installation directory. To use this tool, double-click the file and then use the graphical interface to start, stop or restart services. Server log messages can be checked in the "Server Events" tab.

Call it without any service names to start all services:
```
$ sudo installdir/ctlscript.sh start
```
Use it to restart a specific service only by passing the service name as argument - for example, mysql or apache:
```
 $ sudo installdir/ctlscript.sh restart mysql
 $ sudo installdir/ctlscript.sh restart apache
```
Obtain current status of all services:
```
 $ installdir/ctlscript.sh status
```

The list of available services varies depending on the required components for each application.

NOTE: If you are using the stack manager for Mac OS X-VM, please check the following blog post to learn how to manage services from its graphical tool.

Windows

Bitnami native installers include a graphical tool to manage services. This tool is named manager-windows.exe on Windows and is located in the installation directory. To use this tool, double-click the file and then use the graphical interface to start, stop or restart services. Server log messages can be checked in the "Server Events" tab.

The Windows native installer creates shortcuts to start and stop services created in the Start Menu, under "Programs -> Bitnami APPNAME Stack -> Bitnami Service". Servers can also be managed from the Windows "Services" control panel. Services are named using the format APPNAMESERVICENAME, where APPNAME is a placeholder for the application name and SERVICENAME is a placeholder for the service name. For example, the native installer for the Bitnami WordPress Stack installs services named wordpressApache and wordpressMySQL.

These services will be automatically started during boot. To modify this behaviour, refer to the section on disabling services on Windows.

How to create a full backup of JasperReports?

The Bitnami JasperReports Stack is self-contained and the simplest option for performing a backup is to copy or compress the Bitnami stack installation directory. To do so in a safe manner, you will need to stop all servers, so this method may not be appropriate if you have people accessing the application continuously.

NOTE: If you want to create only a database backup, refer to these instructions for MySQL and PostgreSQL.

Backup on Linux and Mac OS X

Follow these steps:

Change to the directory in which you wish to save your backup.
```
 $ cd /your/directory
```
Stop all servers.
```
 $ sudo installdir/ctlscript.sh stop
```

Create a compressed file with the stack contents.

 $ sudo tar -pczvf application-backup.tar.gz installdir

Start all servers.
```
 $ sudo installdir/ctlscript.sh start
```
Download or transfer the application-backup.tar.gz file to a safe location.

You should now download or transfer the application-backup.tar.gz file to a safe location.

Backup on Windows

Follow these steps:

Stop all servers using the shortcuts in the Start Menu or the graphical manager tool.
Create a compressed file with the stack contents. You can use a graphical tool like 7-Zip or WinZip or just right-click the folder, click "Send to", and select the "Compressed (zipped) folder" option.
Download or transfer the compressed file to a safe location.
Start all servers using the shortcuts in the Start Menu or the graphical manager tool.

Restore on Linux and Mac OS X

Follow these steps:

Change to the directory containing your backup:
```
$ cd /your/directory
```
Stop all servers.
```
$ sudo installdir/ctlscript.sh stop
```
Move the current stack to a different location:
```
$ sudo mv installdir /tmp/bitnami-backup
```
Uncompress the backup file to the original directory:
```
$ sudo tar -pxzvf application-backup.tar.gz -C /
```
Start all servers.
```
$ sudo installdir/ctlscript.sh start
```

IMPORTANT: When restoring, remember to maintain the original permissions for the files and folders. For example, if you originally installed the stack as the root user on Linux, make sure that the restored files are owned by root as well.

Restore on Windows

Change to the directory containing your backup:
```
   $ cd /your/directory
```
Stop all servers using the shortcuts in the Start Menu or the graphical manager tool.
Uninstall the previous services by executing the following command:
```
    $ serviceinstall.bat
```
Create a safe folder named Backups in the desktop and move the current stack to it. Remember to replace PATH with the right location of your folder:
```
    $ move installdir \PATH\Backups
```
Uncompress the backup file using a tool like 7-Zip or Winzip or just double-click the .zip file to uncompress it, and move it to the original directory.
Install services by running the following commands from an elevated command prompt:
```
  $ cd installdir
  $ serviceinstall.bat INSTALL
```
Start all servers using the shortcuts in the Start Menu or the graphical manager tool.

How to upgrade JasperReports server?

It is strongly recommended to create a backup before starting the update process. If you have important data, create and restore a backup to ensure that everything works properly.

To upgrade the application only without modifying any other stack components, follow these instructions.

How to create an SSL certificate for Apache Tomcat?

A detailed guide is available in the official Apache Tomcat documentation at http://tomcat.apache.org/tomcat-6.0-doc/ssl-howto.html.

How to enable SSL access over HTTPS?

You can configure Apache Tomcat to enable SSL access to applications using HTTPS. It is necessary to configure Tomcat with the location of the Apache SSL certificate, as described below.

Check that the certificate file is present at installdir/apache-tomcat/conf/ssl/tomcat.cert.pem and the certificate key file is present at installdir/apache-tomcat/conf/ssl/tomcat.key.pem.

Uncomment the following line in the installdir/apache-tomcat/conf/server.xml file:

   <Connector port="8443"
              protocol="HTTP/1.1" SSLEnabled="true"
              maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
              enableLookups="false" disableUploadTimeout="true"
              acceptCount="100" scheme="https" secure="true"
              clientAuth="false" sslProtocol="TLS"
              keystoreFile="conf/myKeystore"
              keystorePass="your_password"
              SSLCertificateFile="installdir/apache-tomcat/conf/ssl/tomcat.cert.pem"
              SSLCertificateKeyFile="installdir/apache-tomcat/conf/ssl/tomcat.key.pem"/>

Restart the Apache Tomcat server

You should now be able to access your Web applications over HTTPS by browsing to https://localhost:8443.

How to create an SSL certificate?

OpenSSL is required to create an SSL certificate. A certificate request can then be sent to a certificate authority (CA) to get it signed into a certificate, or if you have your own certificate authority, you may sign it yourself, or you can use a self-signed certificate (because you just want a test certificate or because you are setting up your own CA).

Follow the steps below for your platform.

Linux and Mac OS X

NOTE: OpenSSL will typically already be installed on Linux and Mac OS X. If not installed, install it manually using your operating system's package manager.

Follow the steps below:

Generate a new private key:

 $ sudo openssl genrsa -out installdir/apache2/conf/server.key 2048

Create a certificate:
```
 $ sudo openssl req -new -key installdir/apache2/conf/server.key -out installdir/apache2/conf/cert.csr
```
IMPORTANT: Enter the server domain name when the above command asks for the "Common Name".
Send cert.csr to the certificate authority. When the certificate authority completes their checks (and probably received payment from you), they will hand over your new certificate to you.

Until the certificate is received, create a temporary self-signed certificate:

 $ sudo openssl x509 -in installdir/apache2/conf/cert.csr -out installdir/apache2/conf/server.crt -req -signkey installdir/apache2/conf/server.key -days 365

Back up your private key in a safe location after generating a password-protected version as follows:
```
 $ sudo openssl rsa -des3 -in installdir/apache2/conf/server.key -out privkey.pem
```
Note that if you use this encrypted key in the Apache configuration file, it will be necessary to enter the password manually every time Apache starts. Regenerate the key without password protection from this file as follows:
```
 $ sudo openssl rsa -in privkey.pem -out installdir/apache2/conf/server.key
```

Windows

NOTE: OpenSSL is not typically installed on Windows. Before following the steps below, download and install a binary distribution of OpenSSL.

Follow the steps below once OpenSSL is installed:

Set the OPENSSL_CONF environment variable to the location of your OpenSSL configuration file. Typically, this file is located in the bin/ subdirectory of your OpenSSL installation directory. Replace the OPENSSL-DIRECTORY placeholder in the command below with the correct location.
```
 $ set OPENSSL_CONF=C:\OPENSSL-DIRECTORY\bin\openssl.cfg
```
Change to the bin/ sub-directory of the OpenSSL installation directory. Replace the OPENSSL-DIRECTORY placeholder in the command below with the correct location.
```
 $ cd C:\OPENSSL-DIRECTORY\bin
```

Generate a new private key:

 $ openssl genrsa -out installdir/apache2/conf/server.key 2048

Create a certificate:
```
 $ openssl req -new -key installdir/apache2/conf/server.key -out installdir/apache2/conf/cert.csr
```
IMPORTANT: Enter the server domain name when the above command asks for the "Common Name".
Send cert.csr to the certificate authority. When the certificate authority completes their checks (and probably received payment from you), they will hand over your new certificate to you.

Until the certificate is received, create a temporary self-signed certificate:

 $ openssl x509 -in installdir/apache2/conf/cert.csr -out installdir/apache2/conf/server.crt -req -signkey installdir/apache2/conf/server.key -days 365

Back up your private key in a safe location after generating a password-protected version as follows:
```
 $ openssl rsa -des3 -in installdir/apache2/conf/server.key -out privkey.pem
```
Note that if you use this encrypted key in the Apache configuration file, it will be necessary to enter the password manually every time Apache starts. Regenerate the key without password protection from this file as follows:
```
 $ openssl rsa -in privkey.pem -out installdir/apache2/conf/server.key
```

Find more information about certificates at http://www.openssl.org.

How to enable HTTPS support with SSL certificates?

TIP: If you wish to use a Let's Encrypt certificate, you will find specific instructions for enabling HTTPS support with Let's Encrypt SSL certificates in our Let's Encrypt guide.

NOTE: The steps below assume that you are using a custom domain name and that you have already configured the custom domain name to point to your cloud server.

Bitnami images come with SSL support already pre-configured and with a dummy certificate in place. Although this dummy certificate is fine for testing and development purposes, you will usually want to use a valid SSL certificate for production use. You can either generate this on your own (explained here) or you can purchase one from a commercial certificate authority.

Once you obtain the certificate and certificate key files, you will need to update your server to use them. Follow these steps to activate SSL support:

Use the table below to identify the correct locations for your certificate and configuration files.

Variable	Value
Current application URL	https://[custom-domain]/
	Example: https://my-domain.com/ or https://my-domain.com/appname
Apache configuration file	installdir/apache2/conf/bitnami/bitnami.conf
Certificate file	installdir/apache2/conf/server.crt
Certificate key file	installdir/apache2/conf/server.key
CA certificate bundle file (if present)	installdir/apache2/conf/server-ca.crt

Copy your SSL certificate and certificate key file to the specified locations.

NOTE: If you use different names for your certificate and key files, you should reconfigure the SSLCertificateFile and SSLCertificateKeyFile directives in the corresponding Apache configuration file to reflect the correct file names.

If your certificate authority has also provided you with a PEM-encoded Certificate Authority (CA) bundle, you must copy it to the correct location in the previous table. Then, modify the Apache configuration file to include the following line below the SSLCertificateKeyFile directive. Choose the correct directive based on your scenario and Apache version:

Variable	Value
Apache configuration file	installdir/apache2/conf/bitnami/bitnami.conf
Directive to include (Apache v2.4.8+)	SSLCACertificateFile "installdir/apache2/conf/server-ca.crt"
Directive to include (Apache < v2.4.8)	SSLCertificateChainFile "installdir/apache2/conf/server-ca.crt"

NOTE: If you use a different name for your CA certificate bundle, you should reconfigure the SSLCertificateChainFile or SSLCACertificateFile directives in the corresponding Apache configuration file to reflect the correct file name.

Once you have copied all the server certificate files, you may make them readable by the root user only with the following commands:
```
 $ sudo chown root:root installdir/apache2/conf/server*

 $ sudo chmod 600 installdir/apache2/conf/server*
```
Open port 443 in the server firewall. Refer to the FAQ for more information.
Restart the Apache server.

You should now be able to access your application using an HTTPS URL.

How to force HTTPS redirection with Apache?

Add the following lines in the default Apache virtual host configuration file at installdir/apache2/conf/bitnami/bitnami.conf, inside the default VirtualHost directive, so that it looks like this:

<VirtualHost _default_:80>
  DocumentRoot "installdir/apache2/htdocs"
  RewriteEngine On
  RewriteCond %{HTTPS} !=on
  RewriteRule ^/(.*) https://%{SERVER_NAME}/$1 [R,L]
  ...
</VirtualHost>

After modifying the Apache configuration files:

Open port 443 in the server firewall. Refer to the FAQ for more information.
Restart Apache to apply the changes.

How to debug Apache errors?

Once Apache starts, it will create two log files at installdir/apache2/logs/access_log and installdir/apache2/logs/error_log respectively.

The access_log file is used to track client requests. When a client requests a document from the server, Apache records several parameters associated with the request in this file, such as: the IP address of the client, the document requested, the HTTP status code, and the current time.
The error_log file is used to record important events. This file includes error messages, startup messages, and any other significant events in the life cycle of the server. This is the first place to look when you run into a problem when using Apache.

If no error is found, you will see a message similar to:

Syntax OK

How to change the Java memory settings?

The Java Virtual Machine (JVM) determines the default settings for your Java application:

JAVA_OPTS="-Xms256m -Xmx512m"

The Tomcat server uses CATALINA_OPTS to set these Java settings when running:

CATALINA_OPTS="-Xms256M -Xmx768M"

You can increase these settings if necessary by following the steps below:

Linux and Mac OS X

Modify the settings file installdir/apache-tomcat/bin/setenv.sh:
```
 $ export CATALINA_OPTS="$CATALINA_OPTS -Xms256M -Xmx768M"
```
NOTE: You could also modify the Java Virtual Machine (JVM) settings if you prefer.
```
   $ export JAVA_OPTS="$JAVA_OPTS -Xms256M -Xmx768M"
```

Restart Tomcat after modifying the file:

 $ installdir/ctlscript.sh restart tomcat

Windows

Modify the settings file installdir/apache-tomcat/bin/setenv.bat:
```
 $ SET CATALINA_OPTS="%CATALINA_OPTS% -Xms256M -Xmx768M"
```
NOTE: You could also modify the Java Virtual Machine (JVM) settings if you prefer.
```
   $ SET JAVA_OPTS="%JAVA_OPTS% -Xms256M -Xmx768M"
```
Reinstall the services after modifying the file, as shown below. Run the following commands from an elevated command prompt:
```
 $ cd installdir
 $ serviceinstall.bat UNINSTALL
 $ serviceinstall.bat INSTALL
```

How to debug errors in Tomcat?

The main Apache Tomcat configuration file is at installdir/apache-tomcat/conf/server.xml.

Once Apache Tomcat starts, it will create several log files in the installdir/apache-tomcat/logs directory. The main log file is the catalina.out file where you can find error messages. On some platforms, you may need root account privileges to view these files.

How to find the MySQL database credentials?

Database username: root.
Database password: The same as the application password. Find out how to obtain application credentials.

How to connect to the MySQL database?

You can connect to the MySQL database from the same computer where it is installed with the mysql client tool.

$ mysql -u root -p

You will be prompted to enter the root user password. This is the same as the application password.

How to debug errors in your database?

The main log file is created at installdir/mysql/data/mysqld.log on the MySQL database server host.

How to change the MySQL root password?

You can modify the MySQL password using the following command at the shell prompt. Replace the NEW_PASSWORD placeholder with the actual password you wish to set.

$ installdir/mysql/bin/mysqladmin -p -u root password NEW_PASSWORD

How to reset the MySQL root password?

If you don't remember your MySQL root password, you can follow the steps below to reset it to a new value:

Create a file in /home/bitnami/mysql-init with the content shown below (replace NEW_PASSWORD with the password you wish to use):
```
 UPDATE mysql.user SET Password=PASSWORD('NEW_PASSWORD') WHERE User='root';
 FLUSH PRIVILEGES;
```
If your stack ships MySQL v5.7.x, use the following content instead of that shown above:
```
 UPDATE mysql.user SET authentication_string=PASSWORD('NEW_PASSWORD') WHERE User='root';
 FLUSH PRIVILEGES;
```
TIP: Check the MySQL version with the command installdir/mysql/bin/mysqladmin --version or installdir/mysql/bin/mysqld --version.

Stop the MySQL server:

 $ sudo installdir/ctlscript.sh stop mysql

Start MySQL with the following command:

 $ sudo installdir/mysql/bin/mysqld_safe --pid-file=installdir/mysql/data/mysqld.pid --datadir=installdir/mysql/data --init-file=/home/bitnami/mysql-init 2> /dev/null &

Restart the MySQL server:

 $ sudo installdir/ctlscript.sh restart mysql

Remove the script:
```
 $ rm /home/bitnami/mysql-init
```

How to change the MySQL root password in Windows?

You can modify the MySQL password using the following command at the shell prompt. Replace the NEW_PASSWORD placeholder with the actual password you wish to set.

installdir\mysql\bin\mysqladmin.exe -p -u root password NEW_PASSWORD

How to reset the MySQL root password in Windows?

If you don't remember your MySQL root password, you can follow the steps below to reset it to a new value:

Stop the MySQL server using the graphic manager tool. Refer to the how to start or stop the services section.
Check the MySQL version:

installdir\mysql\bin\mysqladmin.exe –version
Create a file named mysql-init.txt with the content shown below depending on your MySQL version (replace NEW_PASSWORD with the password you wish to use):
- MySQL 5.6.x or earlier:
```
 UPDATE mysql.user SET Password=PASSWORD('NEW_PASSWORD') 
 WHERE User='root';
 FLUSH PRIVILEGES;
```
- MySQL 5.7.x or later:
```
 ALTER USER 'root'@'localhost' IDENTIFIED BY 'NEW_PASSWORD'; 
```
Start MySQL server with the following command. Remember to replace PATH with the location in which you have saved the mysql-init.txt file:
```
 installdir " installdir\mysql\bin\mysqld.exe" --defaults-file=" installdir\mysql\my.ini" --init-file="\PATH\mysql-init.txt" --console
```
- The --init file option is used by the server for executing the content of the mysql-init.txt file at startup, it will change each root account password.
- The --defaults-file option is specified since you have installed MySQL using the Bitnami installer.
- The --console option (optional) has been added in order to show the server output at the console window rather than in the log file.
After some minutes, hit Ctrl-C to force the shutdown.
Restart the MySQL server from the graphic manager tool.
After the server has restarted successfully, delete the mysql-init.txt file.

How to install OracleDB client files for Apache Tomcat?

If you want your java application to be able to connect to a full featured and functional OracleDB database, please follow the steps below.

Stop the tomcat server:

 $ sudo installdir/ctlscript.sh stop tomcat

Download the corresponding JDBC drivers for OracleDB from the Oracle official website. Pay attention to the server version. For example, for a 11g Release 2 server, you will need OJDBC6.jar.
Unzip it and place it under the folder installdir/apache-tomcat/lib/ext

Start the tomcat server again:

 $ sudo installdir/ctlscript.sh start tomcat

That was it! Your tomcat installation can now connect to Oracle databases.

How to use OracleDB with JasperReports?

JasperReports natively allows the use of OracleDB as main data source. If you ever wanted to use a more scalable database and professional for your JasperReports installation, here is how.

Step 1: Install JDBC drivers

If you haven't installed the JDBC driver corresponding to the database server you want to connect, please follow the instructions on how to install the OracleDB driver.

Step 2: Add new data source

Log in to JasperReports.
Go to "Data Source > New Data Source".
Select "JDBC Data Source" as the data source type.
Fill in the details of your database (username, password, hostname… etc.).

Step 3: Test the connection

Click on the "Test Connection" button. If everything was configured correctly, you should see a "Successful connection" message.

Step 4 (Optional): Disable MySQL

If you will not use MySQL as another data source, you can permanently disable it in the stack. This ensures it would not start and consume system resources. In order to do so, execute the commands below:

    $ sudo installdir/ctlscript.sh stop mysql
    $ sudo sed -i '1i exit 0' installdir/mysql/scripts/ctl.sh

How to add JasperReports server support for PostgreSQL?

The Bitnami JasperReports stack is configured to use the MySQL database by default. To support PostgreSQL instead, add the JDBC driver for PostgreSQL, as follows:

Download the driver from the PostgreSQL website.
Use the JDBC4 connector for the specific version of your PostgreSQL database. The .jar file should be copied into the installdir/apache-tomcat/lib directory.