Generate and configure a Let's Encrypt certificate

Before running the commands shown on this page, you should load the Bitnami stack environment by executing the installdir/use_APPNAME script (Linux and MacOS) or by clicking the shortcut in the Start Menu under “Start -> Bitnami APPNAME Stack -> Application console” (Windows). On OS X VMs, the installation directory is /opt/bitnami and OS X VM users can click the “Open Terminal” button to run commands. Learn more about the Bitnami stack environment and about OS X VMs.

The steps below describe the process of manually generating and installing a Let’s Encrypt certificate for your Bitnami application. They assume that:

  • You have deployed a Bitnami application and the application is available at a public IP address so that the Let’s Encrypt process can verify your domain.
  • You have the necessary credentials to log in to the Bitnami application instance.
  • You own one or more domain names.
  • You have configured the domain name’s DNS record to point to the public IP address of your Bitnami application instance.

Follow the steps below:

Step 1: Install the Lego client

The Lego client simplifies the process of Let’s Encrypt certificate generation. To use it, follow these steps:

  • Log in to the server console as the bitnami user.
  • Run the following commands to install the Lego client. Note that you will need to replace the X.Y.Z placeholder with the actual version number of the downloaded archive:

    $ cd /tmp
    $ curl -Ls | grep browser_download_url | grep linux_amd64 | cut -d '"' -f 4 | wget -i -
    $ tar xf lego_vX.Y.Z_linux_amd64.tar.gz
    $ sudo mkdir -p /opt/bitnami/letsencrypt
    $ sudo mv lego /opt/bitnami/letsencrypt/lego

These steps will download, extract and copy the Lego client to a directory in your path.

Step 2: Generate a Let’s Encrypt certificate for your domain

NOTE: Before proceeding with this step, ensure that your domain name points to the public IP address of the Bitnami application host.

The next step is to generate a Let’s Encrypt certificate for your domain.

  • Turn off all Bitnami services:

    $ sudo installdir/ stop
  • Request a new certificate for your domain as below, both with and without the www prefix. Remember to replace the DOMAIN placeholder with your actual domain name, and the EMAIL-ADDRESS placeholder with your email address.

    $ sudo /opt/bitnami/letsencrypt/lego --tls --email="EMAIL-ADDRESS" --domains="DOMAIN" --domains="www.DOMAIN" --path="/opt/bitnami/letsencrypt" run

    NOTE: You can use more than one domain (for example, DOMAIN and www.DOMAIN) by specifying the --domains option as many times as the number of domains you want to specify. When supplying multiple domains, Lego creates a SAN (Subject Alternate Names) certificate which results in only one certificate valid for all domains you entered. The first domain in your list will be added as the “CommonName” of the certificate and the rest, will be added as “DNSNames” to the SAN extension within the certificate.

  • Agree to the terms of service.

A set of certificates will now be generated in the /opt/bitnami/letsencrypt/certificates directory. This set includes the server certificate file DOMAIN.crt and the server certificate key file DOMAIN.key.

IMPORTANT: For security reasons, never post or disclose your server’s SSL private key file in a public forum.

An output message will provide some information, including the expiry date of the certificate. Note this expiry date carefully as you will need to renew your certificate before that date in order for it to remain valid.

An example certificate is shown below:

Let's Encrypt CA certificate

NOTE: The steps described above will generate certificates for one or more explicitly-named domains. To generate a certificate for a wildcard domain, you will need to use DNS-01 validation when running the lego tool, as explained in the official Let’s Encrypt documentation.

Step 3: Configure the Web server to use the Let’s Encrypt certificate

Next, tell the Web server about the new certificate, as follows:

  • Link the new SSL certificate and certificate key file to the correct locations. Update the file permissions to make them readable by the root user only. Remember to replace the DOMAIN placeholder with your actual domain name.

    $ sudo mv installdir/nginx/conf/server.crt installdir/nginx/conf/server.crt.old
    $ sudo mv installdir/nginx/conf/server.key installdir/nginx/conf/server.key.old
    $ sudo mv installdir/nginx/conf/server.csr installdir/nginx/conf/server.csr.old
    $ sudo ln -sf /opt/bitnami/letsencrypt/certificates/DOMAIN.key installdir/nginx/conf/server.key
    $ sudo ln -sf /opt/bitnami/letsencrypt/certificates/DOMAIN.crt installdir/nginx/conf/server.crt
    $ sudo chown root:root installdir/nginx/conf/server*
    $ sudo chmod 600 installdir/nginx/conf/server*
    $ sudo ln -sf installdir/letsencrypt/certificates/DOMAIN.key installdir/apps/mattermost/conf/certs/server.key
    $ sudo ln -sf installdir/letsencrypt/certificates/DOMAIN.crt installdir/apps/mattermost/conf/certs/server.crt
  • Restart all Bitnami services:

    $ sudo installdir/ start

To add one or more domains to an existing certificate, simply repeat Steps 2 and 3 again, ensuring the same order of domain names is maintained in the lego command and adding the new domain name(s) to the end with additional –domains arguments.

Step 4: Test the configuration

After reconfirming that your domain name points to the public IP address of the Bitnami application instance, you can test it by browsing to https://DOMAIN (replace the DOMAIN placeholder with the correct domain name).

This should display the secure welcome page of the Bitnami application. Clicking the padlock icon in the browser address bar should display the details of the domain and SSL certificate.

Let's Encrypt certificate in action

NOTE: In case the certificate generation process fails or you wish to start again for any reason, run the commands below to delete the generated output, replace the previous certificates and restart services. You can then go back to Step 1. It is important to note that doing this will delete any previously-generated certificates and keys.

    $ rm -rf /opt/bitnami/letsencrypt

For Apache:

    $ sudo mv installdir/apache2/conf/server.crt.old installdir/apache2/conf/server.crt
    $ sudo mv installdir/apache2/conf/server.key.old installdir/apache2/conf/server.key
    $ sudo installdir/ restart


    $ sudo mv  installdir/nginx/conf/server.crt.old installdir/nginx/conf/server.crt
    $ sudo mv installdir/nginx/conf/server.key.old installdir/nginx/conf/server.key
    $ sudo installdir/ restart

Step 5: Renew the Let’s Encrypt certificate

Let’s Encrypt certificates are only valid for 90 days. To renew the certificate before it expires, run the following commands from the server console as the bitnami user. Remember to replace the DOMAIN placeholder with your actual domain name, and the EMAIL-ADDRESS placeholder with your email address.

    $ sudo installdir/ stop
    $ sudo /opt/bitnami/letsencrypt/lego --tls --email="EMAIL-ADDRESS" --domains="DOMAIN" --path="/opt/bitnami/letsencrypt" renew --days 90
    $ sudo installdir/ start

To automatically renew your certificates before they expire, write a script to perform the above tasks and schedule a cron job to run the script periodically. To do this:

  • Create a script at /opt/bitnami/letsencrypt/scripts/

    $ sudo nano /opt/bitnami/letsencrypt/scripts/
  • Enter the following content into the script and save it. Remember to replace the DOMAIN placeholder with your actual domain name, and the EMAIL-ADDRESS placeholder with your email address.

    For NGINX:

    sudo installdir/ stop nginx
    sudo /opt/bitnami/letsencrypt/lego --tls --email="EMAIL-ADDRESS" --domains="DOMAIN" --path="/opt/bitnami/letsencrypt" renew --days 90
    sudo installdir/ start nginx
  • Make the script executable:

    $ sudo chmod +x /opt/bitnami/letsencrypt/scripts/
  • Execute the following command to open the crontab editor:

    $ sudo crontab -e
  • Add the following lines to the crontab file and save it:

    0 0 1 * * /opt/bitnami/letsencrypt/scripts/ 2> /dev/null

NOTE: If renewing multiple domains, remember to update the /opt/bitnami/letsencrypt/ script to include the additional domain name(s) in the lego command.

Last modification June 18, 2020